Post by Phil Willis on Jan 30, 2016 11:43:07 GMT -8
FAQ: X-SIGHT
1. Which X-Sight unit should I buy: 3-12x or 5-18x?
Think about how you will be using the riflescope and what you will need it to do. Both models are generally the same size and weight, with the 5-18x being slightly larger and heavier, and perform great during daytime and nighttime. The 3-12x has a wider field of view while the 5-18x has greater magnification capabilities.
2. Where can I buy my X-Sight?
ATN products are carried by many local dealers and retailers, including Optics Planet, Cabela's and Bass Pro Shops, as well as online on Amazon and eBay. You may also purchase directly from ATN on their website at atncorp.com. If you live outside the United States, please refer to the following Export Information regarding laws and regulations.
3. What is the maximum caliber rating of the X-Sight?
The X-Sight is rated up to .308. Shooting with larger calibers can cause device failure and void product warranty.
4. Is the X-Sight water resistant?
Yes, the X-Sight can be used in both rain and snow, however, the unit cannot be submerged. Please note, the device is only water resistant when both the battery cap and microSD/HDMI port cover are tight and have not been modified.
5. Is the X-Sight eyepiece made of latex?
Yes, the X-Sight eyepiece contains natural rubber latex which may cause allergic reactions.
6. What type of mounting base does the X-Sight have?
The X-Sight is designed to attach to a Picatinny or Weaver-style base.
7. What batteries should I use with my X-Sight?
The X-Sight requires four (4) AA (1.5v) type batteries. ATN recommends using lithium batteries for optimum function and battery life. For member battery recommendations, please view the Battery thread here.
8. How long is the X-Sight battery life?
Battery life is dependent on the type of batteries used and how often the device is being used. To further prolong battery life, we suggest dimming the screen brightness and setting the device’s sleep delay to one or five minutes. With this setting, you can expect an average battery life of 8-12 hours. The X-Sight can also be used with an external battery pack to further prolong battery life.
9. What microSD card should I use with my X-Sight?
ATN recommends using a Class 10, 4-32GB microSD card. If you plan on recording many videos, we suggest starting with a larger card.
10. What IR illuminator should I use with my X-Sight?
All X-Sight models come with an ATN IR850 illuminator. While this is good, we suggest upgrading to an aftermarket illuminator to get the most out of the device at night.
11. Can I make physical modifications to the X-Sight?
No, any cosmetic modifications will void ATN product warranty.
12. How do I update the X-Sight firmware?
Please follow the simple steps listed here to update the firmware of your X-Sight.
13. Do I need to re-zero my X-Sight after replacing batteries or removing from my firearm?
Replacing batteries and removing the scope from your firearm should not affect your previously set zero, however, we always recommend writing down and double checking your coordinates to ensure your zero have not changed.
Please note, you do need to re-zero after updating your firmware.
14. Why won't my X-Sight turn off when I hit the power button?
To turn off your device, press and hold the power button until the end of the countdown.
15. Why don't I hear a click when I switch my X-Sight between day and night modes?
If you do not hear an audible click when switching between day and night mode, it is possible your scope's internal cut filter is stuck or not functioning correctly. To attempt to fix this, first give your scope a hard smack on the side with your hand. If this does not work, you may need to open your scope to further address the issue. Follow the directions in this video for how to access and clean your cut filter. If you cannot see the two set screws, it is possible Loctite may be concealing them, in which case you will need to power through it with your 1.5 metric tool. If the lens is also Loctited, you will need to send it to the factory for repair.
16. What is the lens thread and size of the 3-12x model?
Objective lens OD: 48.15 mm
Pre-thread diameter of objective: 42.66mm
Diameter of full thread on sunshade: 43.5mm
Thread pitch: 0.75
17. Can I use a mobile viewfinder and record from my X-Sight at the same time?
No, a mobile viewfinder can only used when the device is not recording.
18. Why don't my X-Sight videos have sound when played with Windows Media Player?
There is a known codex issue with X-Sight video files and Windows Media Player that does not allow sound to be played. Because of this, we suggest you download the free VLC media player from VideoLAN at videolan.org/index.html.
1. Which X-Sight unit should I buy: 3-12x or 5-18x?
Think about how you will be using the riflescope and what you will need it to do. Both models are generally the same size and weight, with the 5-18x being slightly larger and heavier, and perform great during daytime and nighttime. The 3-12x has a wider field of view while the 5-18x has greater magnification capabilities.
2. Where can I buy my X-Sight?
ATN products are carried by many local dealers and retailers, including Optics Planet, Cabela's and Bass Pro Shops, as well as online on Amazon and eBay. You may also purchase directly from ATN on their website at atncorp.com. If you live outside the United States, please refer to the following Export Information regarding laws and regulations.
3. What is the maximum caliber rating of the X-Sight?
The X-Sight is rated up to .308. Shooting with larger calibers can cause device failure and void product warranty.
4. Is the X-Sight water resistant?
Yes, the X-Sight can be used in both rain and snow, however, the unit cannot be submerged. Please note, the device is only water resistant when both the battery cap and microSD/HDMI port cover are tight and have not been modified.
5. Is the X-Sight eyepiece made of latex?
Yes, the X-Sight eyepiece contains natural rubber latex which may cause allergic reactions.
6. What type of mounting base does the X-Sight have?
The X-Sight is designed to attach to a Picatinny or Weaver-style base.
7. What batteries should I use with my X-Sight?
The X-Sight requires four (4) AA (1.5v) type batteries. ATN recommends using lithium batteries for optimum function and battery life. For member battery recommendations, please view the Battery thread here.
8. How long is the X-Sight battery life?
Battery life is dependent on the type of batteries used and how often the device is being used. To further prolong battery life, we suggest dimming the screen brightness and setting the device’s sleep delay to one or five minutes. With this setting, you can expect an average battery life of 8-12 hours. The X-Sight can also be used with an external battery pack to further prolong battery life.
9. What microSD card should I use with my X-Sight?
ATN recommends using a Class 10, 4-32GB microSD card. If you plan on recording many videos, we suggest starting with a larger card.
10. What IR illuminator should I use with my X-Sight?
All X-Sight models come with an ATN IR850 illuminator. While this is good, we suggest upgrading to an aftermarket illuminator to get the most out of the device at night.
11. Can I make physical modifications to the X-Sight?
No, any cosmetic modifications will void ATN product warranty.
12. How do I update the X-Sight firmware?
Please follow the simple steps listed here to update the firmware of your X-Sight.
13. Do I need to re-zero my X-Sight after replacing batteries or removing from my firearm?
Replacing batteries and removing the scope from your firearm should not affect your previously set zero, however, we always recommend writing down and double checking your coordinates to ensure your zero have not changed.
Please note, you do need to re-zero after updating your firmware.
14. Why won't my X-Sight turn off when I hit the power button?
To turn off your device, press and hold the power button until the end of the countdown.
15. Why don't I hear a click when I switch my X-Sight between day and night modes?
If you do not hear an audible click when switching between day and night mode, it is possible your scope's internal cut filter is stuck or not functioning correctly. To attempt to fix this, first give your scope a hard smack on the side with your hand. If this does not work, you may need to open your scope to further address the issue. Follow the directions in this video for how to access and clean your cut filter. If you cannot see the two set screws, it is possible Loctite may be concealing them, in which case you will need to power through it with your 1.5 metric tool. If the lens is also Loctited, you will need to send it to the factory for repair.
16. What is the lens thread and size of the 3-12x model?
Objective lens OD: 48.15 mm
Pre-thread diameter of objective: 42.66mm
Diameter of full thread on sunshade: 43.5mm
Thread pitch: 0.75
17. Can I use a mobile viewfinder and record from my X-Sight at the same time?
No, a mobile viewfinder can only used when the device is not recording.
18. Why don't my X-Sight videos have sound when played with Windows Media Player?
There is a known codex issue with X-Sight video files and Windows Media Player that does not allow sound to be played. Because of this, we suggest you download the free VLC media player from VideoLAN at videolan.org/index.html.