|
Post by johnweigel on Apr 19, 2020 17:35:50 GMT -8
I sure hope someone can help. I have finally received my ATN Mars 4 Thermal Scope (Australian version of Thor 4 4-40 thermal scope), and 1500 ABL from separate suppliers here in Australia. It is very difficult, and very expensive to obtain these items here. Unfortunately, and after such a long wait to acquire the gear, I seem to have met with a roadblock immediately: the scope and ABL will not pair. Have consulted instructional videos and paper instruction guides. The idea of sending 12K Aus worth of new gear to somewhere in the US to pair these is not an exciting proposition. Any ideas about how I can resolve the problem here in Australia? Frustrating!!
Sincerely, John Weigel
|
|
steelhat
Member
Posts: 13
ATN Products Owned: Smart HD Optics
|
Post by steelhat on Apr 25, 2020 17:59:46 GMT -8
Howdy John, sorry to hear you're having trouble with your gear. I just got a x-sight 2 hd and still learning. But I'll try anyways. First I would try to get the FW of the scope up to date. After that I would do a factory reset of the scope and finally try to pair them again. When doing that I would make sure that no other BT devices are in the area that could probably interfere with/disrupt the pairing process. If that doesn't work I would contact ATN via email.
Hth
|
|
|
Post by jankroau2 on Dec 2, 2022 4:39:01 GMT -8
John,
Not sure where you are based but I bought my stuff from the Barn at Oakey. They rencoming back to me on Monday so to address the pairing issue. Just ,are sure you pair with the abl and not the rangefinder. Also check to make sure that the scope has selected the right scope. Mine was on the 4-13 instead off the 5-20.
|
|