|
Post by pimp45acp on Feb 3, 2020 10:48:33 GMT -8
Just got a x-sight 2 3-14, when trying to uppdate the firmware (I have followed the instructions but when I turn on the sight with the latest firmware on the sd-card) nothing happens, the "uppdate firmware"-box never shows
The installed firmware is 2.1.07.781.en and the latest firmware uppdate in atn:s webpage is 2.1.07.779 (!?)
I guess that the sight won´t install a firmware with lower number than what is alredy installed on the sight? What should I do?
|
|
retired
Top Contributor
Posts: 189
ATN Products Owned: Night Vision Optics
|
Post by retired on Feb 3, 2020 21:18:28 GMT -8
You are correct, it will not install a smaller numbered firmware than the installed firmware. If it's pre-owned, the newest update may have introduced issues and someone renamed the previous firmware with a higher number and reloaded it. I've had to do that on my 4K scope.
Jim
|
|
|
Post by pimp45acp on Feb 4, 2020 7:06:24 GMT -8
Well the sight is brand new from optiscwarehouse (in the UK) and if it was a pre-owned the have pulles a fast one on me.. The only thing I want to know is if I should install the firmware from ATN:s website or not? If i have to rename it so the number is higher thats not a big issue but if there is a firmware version from ATN with number .781 in the end: why do the have the .779 listed as latest firmware on their website?
|
|
|
Post by ant200 on Feb 23, 2020 3:24:32 GMT -8
Well the sight is brand new from optiscwarehouse (in the UK) and if it was a pre-owned the have pulles a fast one on me.. The only thing I want to know is if I should install the firmware from ATN:s website or not? If i have to rename it so the number is higher thats not a big issue but if there is a firmware version from ATN with number .781 in the end: why do the have the .779 listed as latest firmware on their website?
|
|
|
Post by ant200 on Feb 23, 2020 3:29:27 GMT -8
Hi if you do new update it will run ok but the only thing is you can not range under 27 meters without the abl So when they send them out they down grade the firm ware so you can range down to 5 meter
|
|
steelhat
Member
Posts: 13
ATN Products Owned: Smart HD Optics
|
Post by steelhat on Apr 24, 2020 16:58:03 GMT -8
Hi if you do new update it will run ok but the only thing is you can not range under 27 meters without the abl So when they send them out they down grade the firm ware so you can range down to 5 meter I have the same Firmware version on my X-Sight 2 as the OP. Which FW version would one need in order to range down to 5 meter without the ABL?
Thx
|
|