|
|
Post by dnorris1369 on Dec 6, 2018 5:05:56 GMT -8
how do you update firmware on 4kpro. when I put card in and power on I can't find a setting for firmware update. any help is appreciated. thanks
|
|
|
|
Post by val on Dec 6, 2018 5:18:29 GMT -8
Follow these steps:
Insert an SD card into the scope
Format the SD card in the scope
Turn off scope
Take out SD card and insert into computer
Copy the firmware onto the SD card, into the root folder (not the ATN folder created by the scope)
Insert SD card into scope and turn it on
This will prompt the firmware update.
Click yes and wait for completion
After you have updated the scope make sure you do a factory reset and then choose the correct Device/Lens Type.
If you have sighted in your scope then make sure you export your profiles and write down your X & Y.
|
|
|
|
Post by dnorris1369 on Dec 6, 2018 12:37:17 GMT -8
This didn’t work for me. When I put back in scope and power on I don’t get update firmware
|
|
|
|
Post by dnorris1369 on Dec 6, 2018 12:41:20 GMT -8
And now it’s non responsive can’t even power off
|
|
|
|
Post by luigiluigi1025 on Dec 6, 2018 13:10:43 GMT -8
You have to push the power button for 20 seconds. This will (should) switch off.
I don’t find any utility in resetting. It runs as before.
In any case, is e never ending story: in my case, after updating, the reticle is out of the center of display 😡
|
|
|
|
Post by dnorris1369 on Dec 6, 2018 13:12:57 GMT -8
Yup got it. Still no firmware update. Ugh
|
|
|
|
Post by luigiluigi1025 on Dec 6, 2018 13:17:09 GMT -8
If I knew the result, I didn’t update. No improvements. No gallery in my IPhone. Loosing Wi-Fi connection every few seconds.
... Many jobs to do..,
|
|
|
|
Post by dnorris1369 on Dec 6, 2018 13:26:59 GMT -8
U mean wouldn’t update? Work fine without it?
|
|
|
|
Post by luigiluigi1025 on Dec 6, 2018 13:48:53 GMT -8
It works in the same way or even better
|
|
|
|
Post by val on Dec 7, 2018 1:11:23 GMT -8
This didn’t work for me. When I put back in scope and power on I don’t get update firmware Then I would look into the SD card you are using. Try a different card. ATN recommends a Class 10 (10 Mb/sec) or faster and have capacity from 4 to 64 Gb. |
|
|
|
Post by val on Dec 7, 2018 1:12:42 GMT -8
If I knew the result, I didn’t update. No improvements. No gallery in my IPhone. Loosing Wi-Fi connection every few seconds. ... Many jobs to do.., The Gallery will be available once the iPhone app is updated. That should be any day now. |
|
Panic Button
Top Contributor
Posts: 188 
ATN Products Owned: Smart HD Optics, Night Vision Optics
|
Post by Panic Button on Dec 14, 2018 16:39:07 GMT -8
Here's what works for the xs2, maybe the same will work with the 4k.
If you are trying to install the same version number or lower and you have not changed the file name, it will not display an update window during power up. The file has to be a new version than what's loaded in the scope.
The way to get around that is to rename the file using a higher version number for the file name. Also, if the file is renamed to xsight2.bin it will load it during power up and display update window no matter what version it is.
I've done this many times with my xs2 and it's always worked.
I don't know if using the same xsight2.bin rename will work with the 4k, but you can try it. Maybe the 4k uses a different name? If so, maybe some can chime in and clue us in. I'd like to know, I just received my new 4k yesterday.
Cheers, PB
|
|
