|
Post by tsmithjr on Aug 20, 2018 19:02:47 GMT -8
I was looking at the photo/video settings and it appears that it only shows the microphone,video quality,recoil activation and format sd card. Its not showing the photo mode, burst count and time laps activation. Is there something that I need to do. its the atn x sight 4k pro series.
|
|
mexicanjoe
Top Contributor
Posts: 208
ATN Products Owned: Smart HD Optics
|
Post by mexicanjoe on Aug 20, 2018 19:12:50 GMT -8
Factory reset.
|
|
|
Post by tsmithjr on Aug 20, 2018 20:24:51 GMT -8
Will I have to download the firmware after a factory reset?
|
|
odin
Expert Contributor
Laxing out in the land of Rugby, Hunting and Fishing.
Posts: 726
ATN Products Owned: Smart HD Optics
|
Post by odin on Aug 20, 2018 20:44:29 GMT -8
No Firmware is unaltered by factory reset. Copy your zero and profile data before reset so you can input post factory reset as you will loose them by doing a factory reset.
|
|
|
Post by tsmithjr on Aug 21, 2018 15:25:32 GMT -8
I did the factory reset and it did not fix the problem so I contacted ATN. They stated that the feature has been disabled in the unit. Go figure.
|
|
odin
Expert Contributor
Laxing out in the land of Rugby, Hunting and Fishing.
Posts: 726
ATN Products Owned: Smart HD Optics
|
Post by odin on Aug 21, 2018 15:27:56 GMT -8
Was this something that was on the last firmware update that was pulled after a few days? Could possibly explain partly why it was pulled if so.
|
|
|
Post by tsmithjr on Aug 21, 2018 16:40:31 GMT -8
Not sure, It has the 218 firmware
|
|
odin
Expert Contributor
Laxing out in the land of Rugby, Hunting and Fishing.
Posts: 726
ATN Products Owned: Smart HD Optics
|
Post by odin on Aug 21, 2018 17:39:31 GMT -8
OK - it was the .218 firmware that was pulled - .185 is the current one on the updates page.
|
|
|
Post by tsmithjr on Aug 21, 2018 17:55:44 GMT -8
Should I go download the 185, since mine came with the 218? If so, how do I do that? Will it take the 185 if I download it and try to install it?
|
|
|
Post by val on Aug 23, 2018 5:44:33 GMT -8
Download the 185 and rename the file to xsight3.bin and that should load up the firmware in the scope.
|
|
|
Post by bummmmer on Dec 3, 2018 0:17:04 GMT -8
I just bought the thor 4 1.5 x 5 and have the same issue with my photo/video settings. Does not show the photo options just as yours did. What did you end up doing in the end? Were you able to get those options to appear.
|
|
|
Post by val on Dec 3, 2018 1:20:52 GMT -8
I just bought the thor 4 1.5 x 5 and have the same issue with my photo/video settings. Does not show the photo options just as yours did. What did you end up doing in the end? Were you able to get those options to appear. Those photo options are not available anymore. They caused problems with the firmware so they were removed.
|
|