|
Post by arkrob on Dec 15, 2017 16:36:23 GMT -8
Got my sight in today 3x14.
Worked great until I noticed the firmware was not the latest.
I tried to do the upgrade following the guides here, and the firmware upgrade hung at 49%.
I have tried rebooting, but now it only goes to the ATN screen and hangs.
Pressing enter, power and enter, or anything else seems to do nothing with or without the SD card in place.
Is there anything left to do other than return it?
|
|
bunnyblaster
Expert Contributor
Competitive target shooting & hunting for about 25 years, mostly vermin hunting.
Posts: 585
|
Post by bunnyblaster on Jan 5, 2018 10:13:31 GMT -8
Got my sight in today 3x14. Worked great until I noticed the firmware was not the latest. I tried to do the upgrade following the guides here, and the firmware upgrade hung at 49%. I have tried rebooting, but now it only goes to the ATN screen and hangs. Pressing enter, power and enter, or anything else seems to do nothing with or without the SD card in place. Is there anything left to do other than return it? This was an old post to a similar problem, maybe it'll help: "Have a read of the thread "Configuring Wifi Mode and Reboot -" It deals with hanging units after updates stop at wifi. Now I know yours didn't hang there but the same fix might work. After startup as soon as the ATN logo appears press the enter button five times, it may then let you access the factory reset. Do this and all is apparently ok but you'll need to re-enter your zero setting and preferences etc Hope this works for you. Cheers, BunnyBlaster" So see if your able to get to the factory reset menu by pressing enter 5 x times after the ATN splash screen shows. If this doesn't work I'd go with reformatting my SD card ( full format in a PC) then reloading a freshly downloaded firmware update ( downloaded via a PC ) to the newly formatted SD card. Change the BIN file number from 767 to 768 and stick it back into the x-sight. Connect it to a fresh battery source and power it up. Just remember if your SD card is a cheapo one things will usually go **** up anyway as far as I can tell. Best of luck, BunnyBlaster
|
|
|
Post by pitbull89x on Mar 31, 2019 4:11:50 GMT -8
Arkrob, I am having the same issue with the 779 update. Did you have any luck solving this problem??
|
|
|
Post by iluvatar on May 12, 2019 11:07:02 GMT -8
Hello I tried to update my scope. Update is stuck on 18% I tried to restart my scope. but my scope does not start any more. Can anybody help me?
|
|
|
Post by mikep06 on Aug 25, 2019 13:06:47 GMT -8
I just bought a x-sight II 5x20 HD and the firmare it came with is 781 and 779 is what I find only at ATN update site. Anyone else heard of 781?
|
|
|
Post by mex on Nov 19, 2019 14:05:59 GMT -8
Hey Guys, I have to warm up this topic again...
I wanted to update the latest firmware. All went fine until the progress while installing remained at 96% for at least half an hour, that's when the battery died. Now, when I turn the device on, there's only a blurry blue-ish screen when no card is inserted. When I power up the device with a memory card inserted, it gets stuck at the red ATN-splash-Logo-screen forever. Is there really not a way to factory reset or some kind of fail safe? Is there a hidden button combination code or something I can press?
Why would you sell a device that can be messed up that easily?? Can you plug the sight to your computer and fix it again?
|
|