|
Post by leorere on Jun 8, 2017 5:02:07 GMT -8
hi guys ,anyone can me help to fix out my xsight1 it doesnt install the fw , i try from 266 is factory , try to 343, n higher , is doesnt be nothing , try shut down n turn on again just nothing happend, n my gps also can enter an change , wht should i do? i try to contact atn, no respone , many time , maybe anything can i do to fix it , i have two x sight1 first for my aug z a3 civi , n my scar fn , the one is update higher fw, it works, tq
|
|
texasken
Top Contributor
Posts: 219
ATN Products Owned: Smart HD Optics, Night Vision Optics
|
Post by texasken on Jun 15, 2017 22:02:12 GMT -8
Did you get this resolved?
The FW .bin file must be in the root directory of the SD card. And it must be the ONLY .bin file on the SD. I use a smaller SD card with nothing but the FW file on it. Once the new FW is installed, I shut down the scope and remove that SD and insert my regular SD card. The smaller SD card is then wiped clean (format). This is hard on SD cards (shortens life) but the small ones are cheap. You can use them and format them for a few years worth of FW Updates and just get a new one. I rarely format the larger, more expensive, SD cards.
|
|
Phil Willis
Admin
Posts: 200
ATN Products Owned: Smart HD Optics, Night Vision Optics, Thermal Optics
|
Post by Phil Willis on Jun 16, 2017 6:03:07 GMT -8
Go to ATN Update Website (https://www.atncorp.com/firmware) to download the appropriate firmware. File name will be labeled as followed for the appropriate device X-Sight 1: xsight_1_X_X_version.bin X-Sight 2/X-Spotter: xsight_2_X_X_version.bin BinoXHD: binoxhd_2_X_XX_version.bin ThorHD: thorhd_2_X_XX_version.bin PLEASE NOTE: The device will update with these files names AS LONG as the device is using an older firmware. The device WILL NOT update if it has the SAME or NEWER firmware from what you have on your SD Card. If you need to FORCE the update, you can relabel it to old format (e.g. xsight2.bin, xsight.bin, thorhd.bin) Place the file on your MicroSD card on the ROOT directory Place SD card in device and power ON. Device can be powered ON prior to inserting the SD card A prompt should show up asking if you want to start the UPDATE. Proceed with the update as usual
|
|
|
Post by davku on Jun 25, 2017 13:47:57 GMT -8
I have the same problem, my X sight does not see SM card. I formatted card, delated all other filed and save only firrware, but once I put the card into xsight nothing is happening. xsight does not start updating process. What should I do in order xsight to launch upgrade process?
|
|