|
Post by magnetic on Mar 29, 2017 17:46:11 GMT -8
I need a favor from a Thor HD owner, preferably a 2-8 model with the latest firmware. I'm trying to determine if my issue is isolated to my unit, or all of them. Mine will not power-off and I am unable to restart RAV after it has been on with RAV running for about 20 minutes. Please give this a try and report back.
Step 1: Power on the unit and enable RAV, the start recording.
Step 2: After 20 to 30 minutes press the menu button and select stop recording.
Step 3: Try to power the unit off. If you do not get the shut-down prompt, see if you can restart the RAV recording.
I sincerely appreciate your help.
|
|
Dr. Detector
Top Contributor
Posts: 136
ATN Products Owned: Smart HD Optics
|
Post by Dr. Detector on Mar 30, 2017 6:22:01 GMT -8
Correct me if I am wrong but RAV will only record up to 30 seconds before the shot and 30 seconds after the shot. It automatically saves that event once the shot is taken but only upon detonation of the primer.
|
|
|
Post by magnetic on Mar 30, 2017 11:56:33 GMT -8
That is correct, but you have to enable RAV via the carousel then press the record button to activate it. If it is activated for over 20 minutes or so, it is impossible to power down the scope. 3 or 4 of us in the Facebook group have duplicated this issue. It is a problem in both 702 and 747 versions of the firmware.
|
|
|
Post by rangerdan on Apr 22, 2017 16:21:55 GMT -8
same issue here
|
|