|
Post by magnetic on Mar 23, 2017 12:07:17 GMT -8
I find the center of the screen is nice and sharp, but if I try to look at the items on the sides of the image such as pitch, roll, and distance are all quite blurry for me. Normal or my eyes starting to go bad? There are also a couple settings I would like to better understand, and they are not talked about much in the manual. Thermal Sensitivity: What exactly is it supposed to change? I've played with this one a little bit inside, and in my front yard and could not tell much between the settings. Am I missing something? It is more obvious in other situations? When to use what? Metering Mode: Is this for thermal, or the auto contrast, or When to use what? Thanks for the input.
|
|
Dr. Detector
Top Contributor
Posts: 136
ATN Products Owned: Smart HD Optics
|
Post by Dr. Detector on Mar 27, 2017 6:14:08 GMT -8
Magnetic - I have mine set on Matrix and won't ever change it! Here is what that does for you. Matrix will allow the sensor to scan from edge to edge giving you "FULL" thermal observation, hence my use of it vs. Center Mode which will cause blurry edge to edge observation. As for sensitivity, I use "Auto" and will never change that either just my 2 cents.
|
|
|
Post by magnetic on Mar 27, 2017 8:12:10 GMT -8
Thank you.
|
|