|
Post by simon on Feb 9, 2016 13:55:48 GMT -8
Is this something im stuck with or am i missing something?? Thanks
|
|
Joe Kriz
Top Contributor
Posts: 213
ATN Products Owned: Smart HD Optics
|
Post by Joe Kriz on Feb 9, 2016 14:18:01 GMT -8
You may need to shim your scope mount.
|
|
Bill Amsden
Member
Posts: 8
ATN Products Owned: Smart HD Optics
|
Post by Bill Amsden on Feb 9, 2016 15:43:33 GMT -8
How far is it off......can you still achieve zero when sighting in your scope without shimming? ? I took all my shims out 3 months ago as I could not trust them.... I never leave it on the rifle and in the safe. I can't speak for your scope but mine I can live without the shims, I can take my 5x18 on and off and my 5.56 and this scope will still be 1" at 100 yards. All recommend re-zeroing when one re-installs their scope. I concur. Just saying.......
|
|
|
Post by simon on Feb 10, 2016 7:53:48 GMT -8
I can live with it! its just a little niggle, im hoping its something ATN are addressing for future updates??
|
|
popop1946
Member
Posts: 9
ATN Products Owned: Smart HD Optics, Night Vision Optics
|
Post by popop1946 on Feb 10, 2016 8:59:32 GMT -8
It should start to center as you zoom in..you poi will not be effected though
|
|
|
Post by simon on Feb 10, 2016 9:52:38 GMT -8
It should start to center as you zoom in..you poi will not be effected though It certainly does but it would be nice for it to be central all the time, sometimes i use it on standard mag.
|
|
popop1946
Member
Posts: 9
ATN Products Owned: Smart HD Optics, Night Vision Optics
|
Post by popop1946 on Feb 10, 2016 9:54:46 GMT -8
What is your platform and X-Y readings?
|
|
|
Post by simon on Feb 10, 2016 10:26:17 GMT -8
Im using a sub 12ft lb Air rifle and my x is 264 y = 246.
|
|
popop1946
Member
Posts: 9
ATN Products Owned: Smart HD Optics, Night Vision Optics
|
Post by popop1946 on Feb 10, 2016 11:06:39 GMT -8
It could be that your mount is not really parallel to the bore which could cause a big offset and the height over bore is causing the large Y value. I know I had that problem with my Marauder because of the height needed to clear my magazine..just sayin"
|
|
Jason Jones
Admin
ATN Forum Admin
Posts: 122
ATN Products Owned: Smart HD Optics, Night Vision Optics
|
Post by Jason Jones on Feb 10, 2016 11:57:43 GMT -8
yep, its scope alignment.. impove that and you ret will be much better.
|
|