|
Post by heavyuser on Nov 18, 2022 6:57:06 GMT -8
.....experiencing freezing on 3 different atn 4k pro scopes
All brand new.
Long hold press of the power button restarts the device but eventually it freezes all over again.
Is there a resolution for this or is ATN a strikeout for me?
How many of you are experiencing the same issue.
|
|
|
Post by old on Nov 18, 2022 9:39:04 GMT -8
Try- remove SD may be corrupted, start, if freeze, as per manual connect to PC and make ATN FACTORY RESTORE FIRMWARE.
|
|
|
Post by heavyuser on Nov 19, 2022 13:30:49 GMT -8
Try- remove SD may be corrupted, start, if freeze, as per manual connect to PC and make ATN FACTORY RESTORE FIRMWARE. There is a possibility this was the issue, or having RAV enabled. I removed the SD Card, will wait a few days and see what happens. Thanks for the response.
|
|
|
Post by old on Nov 19, 2022 23:34:03 GMT -8
Doubtful that RAV is involved. Some guys used JUST phone SD, somewhere works. Soon all new equipment- Did you format your new SD in the scope after bought and installed?
|
|
|
Post by heavyuser on Nov 20, 2022 8:13:40 GMT -8
Doubtful that RAV is involved. Some guys used JUST phone SD, somewhere works. Soon all new equipment- Did you format your new SD in the scope after bought and installed? I did. I haven't had a chance to use the scope in the field since removing the sd card. The times I have had the scope on it frozen since removing the sd card.
|
|
|
Post by old on Nov 20, 2022 8:48:53 GMT -8
connect to PC and make ATN FACTORY RESTORE FIRMWARE.
|
|
|
Post by heavyuser on Nov 22, 2022 16:39:51 GMT -8
Did that, still freezing even after removing sd card and installing back to factory firmware and doing a factory reset. Returned for a 5th one, if I have the same problems then I guess Ill be done with ATN.
|
|
|
Post by heavyuser on Nov 26, 2022 16:02:55 GMT -8
6th one hasn't frozen on me yet.
Can't believe it took 6 units before I got one that hasnt frozen within the first hour.
ATN quality control is non existent.
|
|