|
Post by lubenator on Nov 30, 2020 17:19:27 GMT -8
|
|
beast
Frequent Contributor
Posts: 94
ATN Products Owned: Night Vision Optics, Thermal Optics
|
Post by beast on Dec 2, 2020 4:43:08 GMT -8
Do you know if this update has any fixes in it or is it just to add the radar.
|
|
|
Post by osw420 on Dec 3, 2020 16:19:12 GMT -8
It's a hassle to keep the reset button pressed for too long. I think five seconds is enough. I really want to add it to the new firmware.
|
|
|
Post by gilescampbell on Dec 30, 2020 0:22:46 GMT -8
It seems to have fixed my "compass jammed in SW position" issue... the compass is now working again. So far it also seems to have fixed my "crosshairs have disappeared" issue, which randomly presented itself from time to time. And I'm holding out for it having fixed my "I pointed the rifle up/down too quickly and the scope crashed" issue too Despite all of the above this is still the best scope I have ever owned by a massively long way. Recently shot a crow with my sub-12ftlb .22 air rifle at 101 yards. 52.5 inches drop calculated spot on by the scope. 12 inches wind drift estimated by me. On the nail. In 40 years of shooting that's my one of my best shots to date. At that range it's dropping 2 inches per yard, so the ABL was essential to get the range correct in order for the scope to calculate the drop. And I managed to remember to press "record" - yay!
|
|
|
Post by cglee65 on Jan 7, 2021 19:46:02 GMT -8
I just updated my brand new 4k Pro and now the compass reads "err" I tried to turn the scope off and back on, the compass showed for about 2 sec and then went back to "err" any ideas how to fix it?
|
|
|
Post by terraed on Jan 15, 2021 10:39:57 GMT -8
I also updated my 4k Pro and now have an "Err" where the compass should be. Tried the "Factory Reset" but no difference still "Err". Anyone solve this?
|
|
|
Post by rm1776 on Jan 16, 2021 11:54:20 GMT -8
The same thing happened to mine. I removed the scope and did factory reset. And then calibration. It fixed my compass. However, scope is no longer reading altitude,temp, and b. Pressure
|
|
|
Post by terraed on Jan 17, 2021 11:33:41 GMT -8
I didn’t realize this was a beta version when I loaded it. When the compass gave me the “err” on restart I just wanted to put the older version of firmware back on but didn’t know how. After reading through this forum I found out that all I had to do was rename my older versions .bin file to a newer version name. Using this renamed file I followed the upgrade procedure and it recognized it as a newer version and performed the firmware upgrade. Everything’s working now.
|
|
|
Post by gunthar on Jan 20, 2021 4:36:03 GMT -8
Hello Guys,
Download this, thinking of some improvments (i don't care of the radar feature), and now the compass is stuck to North. No calibration nor factory reset fixed it. Changed to previous version and it's work fine now. Seems to have some serious bugs to repair on this beta version...
|
|
|
Post by filippz on Feb 1, 2021 5:25:18 GMT -8
Hello everyone, I just purchased my brand new ATN X-Sight 4K PRO....on the box is written I have to update, but after reading all this I am not quite sure (whether the beta version is fine to update or not). This is my first product, so I don't have such experiences. What is your opinion....update or not? Thank you all!
edit: current firmware version is 3.1.08.451
|
|
david69
Member
Posts: 1
ATN Products Owned: Smart HD Optics
|
Post by david69 on Feb 23, 2021 14:25:55 GMT -8
Hello guys after updating to firmware 480, my compass was in ERR too make a factory reset and move the scope in three axes several times about 12 times each axes COMPASS work fine after that
|
|