triplec76
Member
Posts: 1
ATN Products Owned: Smart HD Optics, Night Vision Optics
|
Post by triplec76 on Oct 15, 2020 18:24:07 GMT -8
Just put the scope on today. Zeroed according to the directions, plus watched several videos to make sure I understood the process thoroughly.
The issue is that the zero location as well as the ABL 1500 zero box are both wayyy down at the bottom of the screen. Actually the ABL box can't even get to the laser dot. It's close enough that it'll work, but obviously something isn't right.
What I was wondering is if anyone had seen this before and what the solution might be? I wouldn't think a 10/22 would need a 20MOA rail to make this scope work, but maybe I'm wrong?
Is there something else I missed, assuming I followed the instructions (online and this forum) to a "T"? I'm mostly concerned that I won't be able to take any longer shots with this zero setup. It was zeroed at 75 yards, so anything too much longer and I'm going to be at the limits of the adjustments.
X 59/Y 289. I thought that was a pretty big number on the Y axis.
Thank you in advance.
|
|
|
Post by paillight on Nov 12, 2020 11:51:00 GMT -8
I am having trouble too with changing the distance. I am sighted in at 20 yards but at 10 yards I am 2 inches low and at 30 yards I am 3 I ches high and I am close at 100 yards I am using the scope to shoot grouse. Any suggestions would be appreciated
|
|