|
Post by hawk on Oct 3, 2020 4:23:39 GMT -8
Hi I recently purchased the ATN Binox 4K. I can’t get it to charge using the provided cable and a 2A Apple adapter Every time I turn the power button on I get a battery critically low message and the system shuts down in 5 seconds The usb cable is firmly snapping into port on right side of binoculars and the electric output is aok
Any advice would be appreciated Thanks Hawk
|
|
|
Post by lubenator on Oct 5, 2020 11:00:57 GMT -8
I personally have found Apple adapters unreliable for anything else but Apple devices. Try other adapter would be the case. If you don't have other adapter, use that very same cable plugged into your computer. If that doesn't work, than you know it's the Bino unit or the cable. Change the cable. If that doesn't work, than, would be a good idea to call CS department at ATN. Hope that you would find the problem outside your Bino. Cheers
|
|
|
Post by rmturner54 on Nov 3, 2022 7:35:26 GMT -8
I dont own a BINOX yet, but the info on your post answered my question about them being re-chargable. THanks
|
|