|
Post by lubenator on Feb 4, 2020 15:20:46 GMT -8
It seems that their is new firmware listed for download with this name - xsight4k_3_1_08_451 As you can see, it's still version 3_1_08, but, some update to _436. I am away until an early April, but, anyone updating to this new version, please, post some info regarding it. What's new and how does it behave! Cheers Ben
|
|
|
Post by osw420 on Feb 6, 2020 3:11:40 GMT -8
xsight4k_3_1_08_451.bin으로 업그레이드 중 xsight4k_3_1_08_436.bin 오류와 같은 오류가 발생합니다. xsight4k.bin이 파일은 오류를 해결하지 않습니다.
I can only see the blank screen.
|
|
|
Post by lubenator on Feb 7, 2020 10:10:20 GMT -8
That's not good!!!
|
|
beast
Frequent Contributor
Posts: 94
ATN Products Owned: Night Vision Optics, Thermal Optics
|
Post by beast on Feb 10, 2020 10:07:01 GMT -8
I updated on Thursday and everything was working great. left for the weekend hunt early Friday morning and that night the screen froze up. Had a heck of a time getting it to shutdown, took about 2 minutes holding the power button down. Restarted it and it been fine since.
|
|
|
Post by lubenator on Feb 11, 2020 9:29:57 GMT -8
Thank you for the update beast! Can you tell what's the difference in .451 compared to .436? Anything new/missing? Obviously the freezing is still there...
|
|
beast
Frequent Contributor
Posts: 94
ATN Products Owned: Night Vision Optics, Thermal Optics
|
Post by beast on Feb 11, 2020 9:54:37 GMT -8
lubenator, I saw no difference in any of the widgets or tool bar sections from the 436 update.
|
|
|
Post by lubenator on Feb 12, 2020 12:37:53 GMT -8
Thank you! Wonder what was the update for than!?! Accordion to your OP, that's not the case either... Also ATN main Firmware update/troubleshooting page does not refer to .451, but, .436 Don't know why?
|
|
beast
Frequent Contributor
Posts: 94
ATN Products Owned: Night Vision Optics, Thermal Optics
|
Post by beast on Feb 14, 2020 4:29:20 GMT -8
RELEASE NOTES: New Features: MIL/MOA Selection MIL Dot Reticle Color Options Fixed bugs: Image Quality Improvement Image Stability Improvement WiFi Connection Optimization Compass Stability Optimization DEAR ATN CUSTOMERS, <a href="https://www.atncorp.com/firmware" target="_blank" >ATN Update Center</a>
Here is the info on what is supposed to be new and what the update is supposed to fix. I just checked my scope concerning the reticle and colors. I believe the reticle is the same as .436 but I could be wrong as I'm not a fan of that type of reticle as I don't do long range shots. (Where I hunt in Florida is so thick that you're longest shot is around 50 yards.) The colors are also the same as .436 As far as the fixes, I've never had problems with any of those things.
|
|
|
Post by lubenator on Feb 19, 2020 10:56:41 GMT -8
Thank you. Would you please post a link to firmware release notes. Thank you
|
|
beast
Frequent Contributor
Posts: 94
ATN Products Owned: Night Vision Optics, Thermal Optics
|
Post by beast on Feb 19, 2020 13:25:41 GMT -8
www.atncorp.com/firmwareHere is the link. you may need to be signed into their site. It's right in the firmware section where you download the update.
|
|
|
Post by lubenator on Feb 19, 2020 20:39:22 GMT -8
I've been there so many times and I still can't see "Firmware Release Notes"! Signed in or not - Nada...
|
|
|
Post by lubenator on Mar 11, 2020 10:25:27 GMT -8
Today I accidentally clicked on the firmware number and the release notes became visible....why ATN doesn't do it properly? With every new and/or updated firmware a white paper to be released is the proper way
|
|
|
Post by racolon on Apr 9, 2020 1:45:54 GMT -8
I thought it was the corona virus that killed my scope but no. Its the fcking firmware. Killed 2 scopes today by just updating the firmware. After you power off, the next time you turn on the scope freezes and all you get is your target picture but no reticle, no display data, unresponsive buttons. Just killed a new scope, no way do downgrade. ATN does it again!
|
|
beast
Frequent Contributor
Posts: 94
ATN Products Owned: Night Vision Optics, Thermal Optics
|
Post by beast on Apr 25, 2020 3:31:31 GMT -8
You can load a earlier version of firmware but you have to change the numbers. Thee are posts detailing this. Did you also try the bug fix files.
|
|
|
Post by beercan on Apr 28, 2020 3:33:29 GMT -8
xsight4k_3_1_08_451.bin으로 업그레이드 중 xsight4k_3_1_08_436.bin 오류와 같은 오류가 발생합니다. xsight4k.bin이 파일은 오류를 해결하지 않습니다.
I can only see the blank screen.
|
|
|
Post by beercan on Apr 28, 2020 3:37:22 GMT -8
i updated f.w.on 4kpro 5x20hd.451f.w.had nothing but problems battery indicator inop.battery draining over night.blackscreen 4times.in 3weeks...going to try.386 f.w.as advised
|
|
|
Post by beercan on Apr 28, 2020 3:39:11 GMT -8
You can load a earlier version of firmware but you have to change the numbers. Thee are posts detailing this. Did you also try the bug fix files.
|
|
|
Post by beercan on Apr 28, 2020 3:41:06 GMT -8
hi were are the bug fix files i didnt know about them.had nothing but problems with 451f.w.any info much appreciated cheers..dave
|
|
|
Post by beercan on Apr 28, 2020 3:50:50 GMT -8
anyone that can send me a link to get this f.w.436 for 4kpro 5x20 cheers dave..
|
|
|
Post by beercans on Apr 28, 2020 15:11:28 GMT -8
hi were are the bug fix files i didnt know about them.had nothing but problems with 451f.w.any info much appreciated cheers..dave
|
|
|
Post by beercans on Apr 28, 2020 15:13:06 GMT -8
hello by bug fixes if you mean the elf file then yes everytime and then ibstalled f.w.
|
|
beast
Frequent Contributor
Posts: 94
ATN Products Owned: Night Vision Optics, Thermal Optics
|
Post by beast on Apr 29, 2020 12:20:30 GMT -8
search youtube for atn x-sight 4k pro bug fix and checkout atn's video that they posted a couple of months ago.
|
|
|
Post by techrep on Jun 25, 2020 13:51:19 GMT -8
Is there any way to get specific suggestions to the dev team for features and enhancements?
As an example, I would like to be able to change the thickness of the reticle lines. I can think of a fairly simple way to expose this in the UI.
Techrep
|
|
|
Post by cootertwo on Jul 8, 2020 7:52:16 GMT -8
YES! Thicker/brighter reticle lines........ please........
|
|
gg67
Member
Posts: 3
|
Post by gg67 on Jan 11, 2021 9:19:07 GMT -8
You can load a earlier version of firmware but you have to change the numbers. Thee are posts detailing this. Did you also try the bug fix files.
|
|